Aerobic Endurance Training in Sport Climbing: Capacity (II). Training Load Elements: Objectives, Intensity and Volume

Versión en español

1. Objectives for Developing Capacity (also known as ARC)

a) Basic objective: Accumulate during the training session many minutes staying on the wall, of actual climbing.

Recommended for the beginning of a cycle, lower and medium level climbers, or those who don't have much experience with training in general.

b) Advanced objective: Total depletion at the end of the sets or the session.

Best for: experienced or high level climbers, or those who have worked the previous objective long enough.

Dani Fuertes resting on La Rubia, 8c+, Villanueva del Rosario, Málaga. Picture: Javipec

 

2.Intensity

We will use a Low intensity. More exactly, up to 25% of maximum grip force (To learn why we choose a % of maximum strength over maximal oxygen consumption or maximum heart rate like they do in other sports, have a look at this entry).

2.1 Why topping at 25% of maximum grip strength?

We will lean on a number of related conclusions:

a) Some authors suggest that 25% of MVC is the highest intesity where the aerobic metabolism is still the main energy source (Fallentin et col., 1993; Byström, 1994; Kimura et col., 2006), and that is the one we want to optimize here (Usaj et col., 2007; Fryer et col., 2014).

b) One of the stimuli that lead to changes in the blood vessels surrounding certain muscle fibers (angiogenesis and arteriogenesis, see previous entry) is the repeated and sustained increase of blood flow in the area (Hudclicka et col., 1992; Prior et col., 1997, Egginton et col., 2001, Hounker et col., 2003) characteristic of aerobic exercise at the aforementioned intensities.

The growth of new blood vessels and the widening of existing ones aid in the development of aerobic endurance. Climber: Tommy Caldwell on Dawn Wall Project, El Capitan, Yosemite National Park, CA (USA). Photo by: Josh Lowell. Source: Climax magazine #20.

One could think that a higher demand on the muscles would increase even more their need for energy and hence blood flow. By the contrary, in isometric contractions maximal blood flow is registered at very low intensities: around 10-25% of MVC. Past this, at 25-40%, the flow does not actually go up, and it even decreases if we go further (Barnes, 1980; Byström and Kilbom, 1990). Let's explain why:

• On the one hand there has been found a direct association between the intensity of a contraction and blood flow (Sjøgaard, Fagard & Fuel, 1988; Byström & Kilbom, 1990); also between the duration of a contraction and blood flow during the interval between contractions, as well as during recovery after exertion (Byström & Kilbom, 1990; Laughlin et col., 1999).

• On the other hand, though, the harder the contraction, the more intramuscular pressure (Barnes et col., 1980; Sejersted et col., 1984; Thompson et col., 2007). When it comes to isometric contractions a problem arises: the blood vessels get occluded for several seconds, compromising nutrient exchange. This leads to a buildup of liquid as well. According to some authors, this explains isometric fatigue (Sjøgaard, Fagard & Fuel, 1988; Kalliokoski et col., 2003).

More specifically, tests performed with a dynamometer on the muscles of the forearm have found that the blood occlusion starts at 30% of MVC, and is complete at 50-70% (Barcroft & Miller, 1939; Barnes, 1980; Sjøgaard et col., 1998).

Mich Kemeter at Verdon (Francia). Photo by: Alex Buisse.

Source: Gripped Canada´s Climbing Magazine facebook page

2.2 The usual problem... How do we control the intensity during a training session?

From a practical point of view, what kind of holds and what climbing styles do I have to favor?

Looking at what we have already seen we should go for holds that, being on a particular wall, wouldn't represent more than 25% of our maximum grip strength.

a) One possible solution would be to perform a test of maximum climbing time on a certain kind of hold, and looking at the relationship found by Rohmert (1960) and confirmed by successive authors (Allison et col., 2004; Frey & Avin 2010; Looft, 2012) between percentage of MVC during an isometric contraction and maximum duration of such contraction. In short, the higher the intensity the quicker the exhaustion and vice versa. This can also be applied to the number of repetitions/sets in dynamic exercises:

• An isometric contraction at 10% of MVC can be held for about an hour,
• A 12% one about 40 minutes,
• Repeated intermittent contractions at 25% of MVC (10-second contraction / 2-second relaxation) can be sustained for 6-8 minutes.
• Around 30% the time drops to 2-4 minutes.

(Rohmert 1960, Byström, 1994; Allison et col., 2004; Frey & Avin 2010).

Maximum durations (minutes) for different intesity (%MVC) intermittent contractions (contraction time + relaxation time) and continuous contractions (Byström y Kilbom, 1990)

All these figures have to be taken with a grain of salt, though, because:

i) The participants were untrained people for whom the forearm muscles were not a key performance factor.

ii) There is great variability in low intensity endurance among individuals.

iii) The dyamometer is not considered a specific tool to measure maximum grip strength in climbing (Watss, 2004) neither to assess actual climbing performance. In this regard, we don't know about any climbing-oriented tests that measure maximum time for a wide variety of intensities during real climbing.

Recently López-Rivera, E. (2014) has put forward in her PhD thesis a formula for estimating maximum hang-off duration as a function of edge depth (6-14 mm) and sport level (6b+ to 8c+, n=36), but it is probably valid for higher intensities only (we will go over it in the entries about high intensity endurance) and it remains to be seen its application to actual climbing on holds of similar size to the test ones.

Eva López. Photo by Javipec

b) The common sense approach, a simpler way:

The goal is to find holds and walls of a certain angle that allow us to endure the programmed climbing time at a low intensity:

• For low-mid level or high volume sessions, we will probably choose the largest holds, those deep enough to fit the entire fingers, with a positive and rounded profile (jugs), on vertical or less than vertical walls. For higher levels the holds could be similar, but the wall more steep or overhanging. Trying holds not so deep is a possibility. Anyway, each climber will have to test it...because as you already know, individualization and control of the training load is key for an effective training.

We will learn to associate low intensity to a set of sensations that can be described as follows.

 

2.2.2 Sensations related to the Physiological Effects of Capacity Training

Several authors have assessed the validity of subjective scales of perception to control the intensity in different sports (Seyler, S. in Mujika, 2012 [editor]). To develop our Capacity we have to look for and maintain the following sensations:

Local signs at the forearms:

• Moderate swelling and activation, never stiffness and strong pumping. As we progress in time or sets we may need to shake off every 2-3 moves for 1-2 seconds.
• Some vasodilation that can translate into "heat", reddening, bulging veins...
• Progressive "depletion" (according to the objectives for the session).
• Mild pain. Using the subjective scale from 1 to 5 developed by Binney & MacClure (2006), we should rate at 1 or 2.

Global signs:

• Light increase in breath and heart rate, etc.
• Moderate perspiration.
• As the session progresses, especially at the end of every set, it is normal to notice our movements are "slower", perhaps due to some related factors: a) we start running out of glycogen and use slow-burning fatty acids, b) we need to save energy and the kind of holds we are using allows us to do that, and c) because this way we can relax the free hand a bit longer. When climbing easy parts our hand can stay free for about 0,5 seconds, but it can go up to 1-2 seconds if we climb slower, giving time to the forearm to recover and keep on functioning.

Note: In the future we will publish an entry discussing a proposal for a load control scale in climbing training.
 

3. Volume

From 10 to 40-60 minutes, attending to the use of continuous or interval methods, our level, our training experience, climbing projects and time of the season, etc.

The next post will expand on the continuous and interval methods, and will offer some guidelines to customize total volume, number of sets, rest pauses, etc.

RELATED LINKS

Why we need to train Local Aerobic Endurance: Let the Numbers Talk

Objectives and Bases for Designing an Endurance Training Program in Sport Climbing

Aerobic Endurance Training in Sport Climbing: Capacity (I). Physiological Adaptations

 

RECOMMENDED READINGS

• Bechtel, S. Unlearning Endurance Training, website: "Climb Strong"[on-line], Entry from January 21th, 2013. Available at: http://www.climbstrong.com/articles/20130121_12
• Guyton, A., and Hall, J. (2006). Textbook of medical physiology, 11th.
• MacLeod, D (2010). 9 out of 10 climbers make the same mistakes: navigation through the maze of advice for the self-coached climber. Rare Breed Productions. (pp 85-89).
• Randall, T Tricks of the endurance training trade, website: "Tom Randall Climbing"[online], Entry from July 9th, 2012. Available at: https://tomrandallclimbing.wordpress.com/2012/07/09/tricks-of-the-endurance-training-trade/
• Wilmore, JH and Costill, DL (2004). Physiology of Sport and Exercise. Human Kinetics.

REFERENCES

• Allison, B., Desai, A., Murphy, R., & Sarwary, R. M. (2004). Human potential of applying static force as measured by grip strength: Validation of Rohmert’s formula (Doctoral dissertation, Thesis. San Jose State University).
• Barcroft H, and Millen JLE (1939) The blood flow through muscle during sustained contraction. J Physiol (Lond) 97:17--3
• Barnes WS. (1980). The relationship between maximum isometric strength and intramuscular circulatory occlusion. Ergonomics 23: 351–357.
• Binney, D, and McClure, S (2006). Aerobic and anaerobic power: Power endurance. Climb, 26, 64 66.
• Byström, SEG, and Kilbom, Å (1990). Physiological response in the forearm during and after isometric intermittent handgrip. European journal of applied physiology and occupational physiology, 60(6), 457-466. 
• Byström, S (1994). Estimation of aerobic and anaerobic metabolism in isometric forearm exercise. Upsala journal of medical sciences, 99(1), 51-62.
• Fallentin, N, Jørgensen, K, and Simonsen, EB (1993). Motor unit recruitment during prolonged isometric contractions. European journal of applied physiology and occupational physiology, 67(4), 335-341.
• Frey Law, L. A., & Avin, K. G. (2010). Endurance time is joint-specific: a modelling and meta-analysis investigation. Ergonomics, 53(1), 109-129. 
• Fryer, S., Stoner, L., Scarrott, C., Lucero, A., Witter, T., Love, R., ...and Draper, N. (2014). Forearm oxygenation and blood flow kinetics during a sustained contraction in multiple ability groups of rock climbers. Journal of sports sciences, (ahead-of-print), 1-9.
• Hounker M, Schmid A, Schmidt-Trucksass A, Grathwohl D, and Keul J (2003). Size and blood flow of central and peripheral arteries in highly trained able-bodied and disabled athletes. J Appl Physiol 95: 685–691.
• Kimura, N, Hamaoka, T, Kurosawa, Y, and Katsumura, T (2006). Contribution of intramuscular oxidative metabolism to total ATP production during forearm isometric exercise at varying intensities. TheTohoku journal of experimental medicine, 208(4), 307-320.  
• Looft, JM (2012). Modeling and validating joint based muscle fatigue due to isometric static and intermittent tasks.
• López-Rivera, E (2014): Efectos de Diferentes Métodos de Entrenamiento de Fuerza y Resistencia de Agarre en Escaladores Deportivos de distintos Niveles (Tesis Doctoral). Programa de Doctorado en Rendimiento Deportivo, Universidad de Castilla-La Mancha, Toledo, España.
• Rohmert, W, 1960. Determination of the recovery pause for static work of man. Internationale Zeitschrift Fur Angewandte Physiologie, Einschliesslich Arbeitsphysiologie 18, 123-164.
• Seiler, S  (2012). Training Intensity Distribution, Chapter 4. En Mujika, I. (editor), Endurance Training (pág. 31-39). Bizkaia. I. Mujika.
• Sjøgaard, G, Savard, G, and Juel, C (1988). Muscle blood flow during isometric activity and its relation to muscle fatigue. European journal of applied physiology and occupational physiology, 57(3), 327-335.
• Sejersted OM, Hargens AR, Kardel KR, Blom P, Jensen O, and Hermansen L. (1984). Intramuscular fluid pressure during isometric contraction of human skeletal muscle. J Appl Physiol 56: 287–295
• Thompson, B. C., Fadia, T., Pincivero, D. M., and Scheuermann, B. W. (2007). Forearm blood flow responses to fatiguing isometric contractions in women and men. American Journal of Physiology-Heart and Circulatory Physiology, 293(1), H805-H812.
• Kalliokoski, K. K., Laaksonen, M. S., Takala, T. O., Knuuti, J., and Nuutila, P. (2003). Muscle oxygen extraction and perfusion heterogeneity during continuous and intermittent static exercise. Journal of Applied Physiology, 94(3), 953-958.
• Ušaj, A., Jereb, B., Robi, P., and von Duvillard, S. P. (2007). The influence of strength-endurance training on the oxygenation of isometrically contracted forearm muscles. European journal of applied physiology, 100(6), 685-692.
• Watts, P. B. (2004). Physiology of difficult rock climbing. European journal of applied physiology, 91(4), 361-372.